ALL THE PHOTOS:
Fenix 5
Description:
- Double roof in Diamond 70D 75 g/m2 polyester with aluminised polyurethane coating heat-insulating, 2000 mm waterproof- Inner chamber in water-repellent and breathable polyester
- Inner chamber floor in Polyester 70D, 80 g/sqm. Water resistance 2500 mm
. - Double roof floor made of waterproof polyethylene fully welded, waterproofing 10,000 mm
. - Taped seams in the double roof and in the floor chamber for a total waterproofing - Three-layer construction to reinforce the corners of the bowl
- Poles: 3 identical pre-bonded fibreglass poles
- External poles - Inner tent suspended from the poles with ribbons, olivettes
- Steel pickets...[continue]
There are more information available about this product look on Details...
- Double roof in Diamond 70D 75 g/m2 polyester with aluminised polyurethane coating
heat-insulating, 2000 mm waterproof
- Inner chamber in water-repellent and breathable polyester
- Inner chamber floor in Polyester 70D, 80 g/sqm. Water resistance 2500 mm
.
- Double roof floor made of waterproof polyethylene fully welded,
waterproofing 10,000 mm
.
- Taped seams in the double roof and in the floor chamber for a
total waterproofing
- Three-layer construction to reinforce the corners of the bowl
- Poles: 3 identical pre-bonded fibreglass poles
- External poles
- Inner tent suspended from the poles with ribbons, olivettes
- Steel pickets
- Large front apse
- Ventilation hoods and windows
- Front, side and rear entrance
- Air Ventilation System with large mosquito net; air inlets and
windows to ventilate the tent
- Front and side double roof door with internal mosquito net
- Transparent windows on the front of the double roof
- Interior storage pockets
- Distance of the double roof from the base adjustable
optimum tensioning
- Floor on opening front door
- Room separated by removable partition
- Opening on double roof for the passage of electrical cables
- Tie rod system for securing the tent, multipoint for increased
multipoint for greater structural strength in strong winds
- Internal lamp hook
- Large storage bag made of Supertex
- Repair kit
- Video instructions for assembly can be activated with QRCode
- Maximum outer dimensions: 390x320 cm
- Camera dimensions: 300x210
- Camera height: 190 cm
- Maximum height: 200 cm
- Inner tent volume: 7.6 cubic metres
- Dimensions in case: 65x30x30 cm
- Weight: 13 kg
- Assembly Time: 40 Minutes
.
Translated with www.DeepL.com/Translator (free version)
No review for the product.
Be the first to leave your review, Use the following form...Write Your review